Products involved in ATEX certification：
1.ATEX Certified Electrical Equipment: Electrical equipment refers to equipment that contains electronic components for generating, storing, distributing, converting or controlling energy use.
2.ATEX Certified Non-Electrical Equipment: Only mechanically moving equipment that generates ignition sources (e.g. hot surfaces, friction sparks, etc.) such as decelerators, fans, compressors, brakes, mixers. Non-electrical equipment is usually connected to electrical equipment to provide kinetic energy.
The ATEX directive classifies devices into three categories based on their level of protection：
Category 1 - Very high level of protection
Category 2 - High level of protection
Category 3 - Normal level of protection
If the device is used in zones 0, 1 or 2, the category number is followed by the letter G (gas, vapor/mist)：
Zone 0 | Zone 1 | Zone 2 |
Class 1G devices | Class 2G devices | Class 3G devices |
如果设备被用于 20、21或22区，则类目数字后跟一字母D（粉尘）:
Zone 20 | Zone 21 | Zone 22 |
Class 1D devices | Class 2D devices | Class 3D devices |
The device is also divided into：
Class I Equipment (Mine Equipment: Classes M1 and M2) - Equipment for underground parts of mines and equipment for underground parts of Mines
Class II Equipment (Non-mining Equipment: Class 1, Class 2, Class 3) - Equipment used in other places where danger arises from an explosive environment.Production enterprises need to determine the product explosion-proof details before certification, such as：Explosion-proof type, mining or non-mining, equipment category, gas group, temperature group, equipment protection level；
2.Production enterprises confirm explosion-proof mode, usually using B+E mode, most of which are single B mode, or according to the quantity of orders, can also use single G mode.；
When confirming that products will not be exported to the international market for the time being, we recommend a more economical way to use B mode, which is the type test approval certificate, which can meet the requirements of domestic customers and tenders.
If you need to meet the requirements of both domestic customers and the EU market, use B+E mode.That is, type test approval certificate + product quality assurance system
Model Categories | Mode | Specific content (see appendix to instructions) |
EU type examination EC Type test | B | Appendix III |
Producion quality assurance Explosion proof system certification | E | Appendix VII |
Unit Verification Single verification | G | Appendix IX |
ATEX防爆认证适用的标准如下
EU Standard No | Standard |
EN 60079-0:2018 | Part 0: General Requirements for Equipment |
EN 60079-1:2014 | Part 1: Equipment protected by flameproof enclosure "db" |
EN 60079-2:2014 | Part 2: Equipment protected by positive pressure enclosure type "p" |
EN 60079-5:2015 | Part 5: Equipment protected by sand filled "q" |
EN 60079-6:2015 | Part 6: Equipment protected by oil immersed type "o" |
EN 60079-7:2015 | Part 7: Equipment protected by increased safety "e" |
EN 60079-11:2012 | Part 11: Equipment protected by intrinsically safe type "i" |
EN 60079-15:2019 | Part 15: Equipment protected by non sparking type "n" |
EN 60079-18:2015 | Part 18: Equipment protected by casting type "m" |
EN 60079-31:2014 | Part 31: Protection of dust ignition equipment for type "t" enclosures |
EN 60079-34:2011 | Part 34: Application of equipment manufacturer's quality assurance system |
Explosion proof ATEX service
Shanghai Jiyi, as an authorized agency of EU announcement, can provide the following services：
·Conformity assessment and verification for all relevant products
·Product classification according to the requirements of the Directive
·Issue the required EU type inspection certificate (Annex III and Annex IX)
·Documentation and localization of safety operation procedures for explosion-proof products
Products involved in ATEX certification：
1.ATEX Certified Electrical Equipment: Electrical equipment refers to equipment that contains electronic components for generating, storing, distributing, converting or controlling energy use.
2.ATEX Certified Non-Electrical Equipment: Only mechanically moving equipment that generates ignition sources (e.g. hot surfaces, friction sparks, etc.) such as decelerators, fans, compressors, brakes, mixers. Non-electrical equipment is usually connected to electrical equipment to provide kinetic energy.
The ATEX directive classifies devices into three categories based on their level of protection：
Category 1 - Very high level of protection
Category 2 - High level of protection
Category 3 - Normal level of protection
If the device is used in zones 0, 1 or 2, the category number is followed by the letter G (gas, vapor/mist)：
Zone 0 | Zone 1 | Zone 2 |
Class 1G devices | Class 2G devices | Class 3G devices |
如果设备被用于 20、21或22区，则类目数字后跟一字母D（粉尘）:
Zone 20 | Zone 21 | Zone 22 |
Class 1D devices | Class 2D devices | Class 3D devices |
The device is also divided into：
Class I Equipment (Mine Equipment: Classes M1 and M2) - Equipment for underground parts of mines and equipment for underground parts of Mines
Class II Equipment (Non-mining Equipment: Class 1, Class 2, Class 3) - Equipment used in other places where danger arises from an explosive environment.Production enterprises need to determine the product explosion-proof details before certification, such as：Explosion-proof type, mining or non-mining, equipment category, gas group, temperature group, equipment protection level；
2.Production enterprises confirm explosion-proof mode, usually using B+E mode, most of which are single B mode, or according to the quantity of orders, can also use single G mode.；
When confirming that products will not be exported to the international market for the time being, we recommend a more economical way to use B mode, which is the type test approval certificate, which can meet the requirements of domestic customers and tenders.
If you need to meet the requirements of both domestic customers and the EU market, use B+E mode.That is, type test approval certificate + product quality assurance system
Model Categories | Mode | Specific content (see appendix to instructions) |
EU type examination EC Type test | B | Appendix III |
Producion quality assurance Explosion proof system certification | E | Appendix VII |
Unit Verification Single verification | G | Appendix IX |
ATEX防爆认证适用的标准如下
EU Standard No | Standard |
EN 60079-0:2018 | Part 0: General Requirements for Equipment |
EN 60079-1:2014 | Part 1: Equipment protected by flameproof enclosure "db" |
EN 60079-2:2014 | Part 2: Equipment protected by positive pressure enclosure type "p" |
EN 60079-5:2015 | Part 5: Equipment protected by sand filled "q" |
EN 60079-6:2015 | Part 6: Equipment protected by oil immersed type "o" |
EN 60079-7:2015 | Part 7: Equipment protected by increased safety "e" |
EN 60079-11:2012 | Part 11: Equipment protected by intrinsically safe type "i" |
EN 60079-15:2019 | Part 15: Equipment protected by non sparking type "n" |
EN 60079-18:2015 | Part 18: Equipment protected by casting type "m" |
EN 60079-31:2014 | Part 31: Protection of dust ignition equipment for type "t" enclosures |
EN 60079-34:2011 | Part 34: Application of equipment manufacturer's quality assurance system |
Explosion proof ATEX service
Shanghai Jiyi, as an authorized agency of EU announcement, can provide the following services：
·Conformity assessment and verification for all relevant products
·Product classification according to the requirements of the Directive
·Issue the required EU type inspection certificate (Annex III and Annex IX)
·Documentation and localization of safety operation procedures for explosion-proof products
